SALDABOND® 100X
EN 12004 C1TE
Tile adhesive
Formulated in Italy · Made in Kuwait
Standard and classEN 12004 C1TE
TypeTile adhesive
White
20 kgPack
Interior and exterior floors and walls
Open time ≥ 30 min at 40 °C
Reduced slip
What C1TE means
EN 12004 class: C1TE
- C1Normal cementitious tile adhesive
- TReduced slip
- EExtended open time
Coverage
One 20 kg bag: about 3.3 to about 5.7 m², by notch
| Notch | Consumption (kg/m²) | Coverage (m²) per 20 kg bag |
|---|---|---|
| 6 mm | about 3.5 | about 5.7 |
| 8 mm | about 4.5 | about 4.4 |
| 10 mm | about 6.0 | about 3.3 |
Back-buttered porcelain: add about 1.5 kg/m²
Key values
- Open time
- ≥ 30min
- Working time
- 4 h
- Rest
- 5 min, then remix
- Notch
- 6–10 mm
- Adjust within
- 20 min
- Grout after
- 24 h
- Foot traffic after
- 24 h
- Application temperature
- +5 °C to +40 °C
Substrates
Use on
Concrete
Cement render
Screed
Blockwork
Existing tiles (primed)
Gypsum board (primed)
Not on
Wood
Metal
Painted surfaces
Anhydrite screed without primer
Substrates below 5 °C or wet
Shelf life and storage
Shelf life: 12 months from date of manufacture
Store dry, off the ground, in the original sealed bag
Storage temperature: +5 °C to +35 °C
Safety
DANGER
- Causes skin irritation.
- May cause an allergic skin reaction.
- Causes serious eye damage.
- May cause respiratory irritation.
- Keep out of reach of children.
- Avoid breathing dust.
- Wear protective gloves and eye protection.
- IF IN EYES: rinse with water for several minutes, remove contact lenses if easy, continue rinsing.
- Immediately call a POISON CENTER or doctor.
Contains: Portland cement.
Documents
Safety data sheet
Request by emailHow to order
- 1Message or call us
- 2Tell us the product and quantity
- 3We reply the same working day
Saturday–Thursday: 09:00–21:00
Friday: closed